![]() You now know how to apply decorative plaster. Leave it to dry for the time indicated by the manufacturer. In this instance, spread it over a larger surface. If the varnish runs, it means there is too much. Apply another layer with the roller if this is the case. If some areas are still dry, it means there is not enough varnish there. Spread it from bottom to top, in vertical strips until your entire wall is varnished. When drywall mud is applied over these types of paints, it adheres well due to their thickness and the presence of bonding agents within them. The varnish needs to be spread with a short-haired roller, which is ideal for smooth surfaces. Water-Based Paints Latex Paint: Latex paints are water-based, which means they are thicker than traditional oil-based paints. Once the second layer of plaster coating has been applied, buff the surface with a cloth. This second layer should be applied from the top to the bottom, in semi-circles, exactly as you did the first time.Īt this stage however, the plaster needs to be perfectly smooth and have no strokes between the strips. Once the first layer is dry, apply the second. STAGE 2: Applying a second layer of decorative plaster If this happens, remove them by hand and smooth the plaster coating over again. The appearance of stripes indicates that small stones or dry clumps of plaster are present. The second layer however, will need to be smooth. If this happens, you will need to scrape off the excess.Īt this stage, the plaster coating does not need to be completely smooth: the strokes formed between the different strips will give the wall a daubed effect. If there is too much plaster, small lumps will appear. This movement will create nuances which will give the wall a daubed effect.Ĭarefully spread and remove any excess. Apply the coating in arched semi-circles, starting from the top of your wall. The wall is ready for you to apply the first layer of decorative plaster. Once this first coating is dry, scratch off any rough bits and carefully sweep up the residue. To do this, refer to the video 'Applying a gap filler'. STAGE 1: Applying the first coat of decorative plasterīefore plastering the wall, apply a primer or spackle. There are three stages required for applying the decorative plaster coating, which we will describe to you in detail. ![]() To apply this decorative plaster, you will need: a bucket, a spatula, two coating knives, a flat paintbrush, a short-haired roller, a broom, a cloth, decorative plaster and decorative varnish. Applying a decorative plaster coating will allow you to take full advantage of the wall's properties whilst giving the wall a attractive appearance. There are many benefits to having a wall made out of aerated concrete: it is light, easy to build on, it has very good insulating properties and is non-inflammable. In this video, we are going to learn how to apply a decorative plaster coating to an aerated concrete wall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |